South Carolina LP Gas Reseller Practice Test

These questions are part of the practice quiz. Start practicing

• What safety measure must be observed regarding smoking and open flames near an ASME container?
• At what temperature does liquid propane vaporize?
• What is the maximum individual capacity for service station containers?
• In buildings under construction or repair, what is the maximum total water capacity of LP Gas containers manifold together for any one heater?
• Which of the following measurements corresponds to the maximum pressure discharge limit for liquid pumps?
• What is the purpose of the hydrostatic relief valve installed in the piping system of an LP Gas storage facility?
• What is the required distance for a discharge outlet of regulators vented to the outside from any building opening?
• For LP Gas to be sold, what must a retailer be certified as?
• Who may be permitted to enter an LP Gas facility during business hours to ensure public safety?
• LP Gas fuel containers used on passenger carrying vehicles shall not exceed what capacity?
• In case of an LP Gas leak within a building, what is the most critical action to take?
• What device must be installed in a liquid transfer hose equipped with a shutoff valve at the discharge end?
• What is the role of an anode rod in LP gas water heaters?
• What is the maximum inside diameter allowed for transfer hoses used to fill individual containers indoors?
• What should be done if an LP gas appliance is found to be leaking?
• What is LP gas primarily made up of?
• What protocol should be followed in case of a propane-related fire?
• What certification must an individual hold to sell propane in South Carolina?
• Individual LP Gas containers used on other than passenger carrying vehicles that operate on highways shall not exceed what capacity?
• Which valve is designed to automatically close at the rated flow specified by the manufacturer?
• What is the distance from a liquid transfer's shutoff valve that requires a hydrostatic relief valve?
• Which statement describes ideal ventilation for storing LP gas cylinders?
• What is one way to determine if a propane tank is full?
• According to NFPA pamphlet #54, unvented space heaters should not be installed in which type of area?
• Which type of heating system is specifically restricted from installation in bathrooms according to NFPA pamphlet #54?
• What protective gear is commonly recommended when working with LP gas?
• What is the standard color used in LP gas lines to indicate propane?
• What is the maximum period allowed for a temporary installation according to NFPA #58?
• How often should LP gas cylinders be inspected for safety?
• What could be a consequence of not having the LP Gas dealer's name on the tank?
• What type of vent pipe should be installed on a LP Gas wall furnace exceeding 50,000 BTU?
• How should a damaged propane tank be handled?
• What is the maximum quantity of LP Gas that may be stored inside a specifically constructed building or room?
• What does the color yellow signify in LP gas marking?
• What is the maximum length allowed for a flexible component connector used in bulk plant piping systems?
• What minimum working pressure should fittings used on the discharge of the liquid transfer pump be rated for?
• What is the recommended method for thawing frozen LP gas lines?
• What is a critical factor for determining the proper size of LP gas piping?
• What is the maximum number of capped openings allowed in ASME containers with a capacity of less than 2,000 water gallons?
• When using LP Gas for demonstration and/or training purposes, what is the distance required between multiple containers if each has a maximum water capacity of 5 pounds?
• Who is responsible for ensuring that DOT cylinders and/or containers for LP Gas are requalified according to regulations?
• What is the minimum distance required between the relief valve on an ASME container of 125 water gallons capacity and a building opening below the discharge level?
• What is the main purpose of an LP gas Meter?
• What is the main purpose of a gas detection system in an LP gas installation?
• How often should propane tanks typically be inspected?
• What is the purpose of a hydrostatic relief valve in a liquid transfer hose?
• What does "DOT" stand for in the context of LP gas cylinder regulation?
• Fittings used with vapor LP Gas at pressures not exceeding 125 PSIG should have a working pressure of what PSIG?
• What is the minimum number of emergency access gates required for bulk storage plants protected by a six-foot high industrial fence?
• Which material is prohibited for use in container appurtenances for LP Gas under service conditions?
• What happens if propane is not stored upright?
• What is the minimum distance that must be maintained between the relief valve on a DOT container and a building opening beneath the level of the relief valve discharge?
• What is the primary purpose of a relief valve in gas storage?
• What is the maximum capacity of LP Gas permitted in a building undergoing minor renovations with public access during normal work hours?
• What should be done with a propane tank that is no longer in service?
• What is the role of the Deputy State Fire Marshal in relation to LP Gas facilities?
• Container appurtenances need to maintain what PSIG rated working pressure at a minimum?
• How frequently should LP gas piping be inspected?
• Why is it essential to maintain certain distances between LP Gas valves and buildings?
• When a dealer takes over another dealer's account, which action is not a legal requirement?
• Where should pressure gauges be installed in an LP Gas System used in a bulk plant?
• What is the acceptable condition to transport propane cylinders in a vehicle?
• Which method should be used to re-supply a permanent customer fuel storage facility located on a rooftop?
• What should be included in an emergency evacuation plan for an LP gas facility?
• Which technique presents an unacceptable risk in checking an LP Gas piping system for leaks?
• Under what conditions should LP gas cylinders be stored?
• What is the purpose of a fixed liquid level gauge on containers being filled by volume?
• What must be ensured during the delivery of LP gas?
• What is the minimum rated working pressure that container appurtenances must have?
• What is typically a risk if an LP Gas container is not painted with reflective paint?
• What safety measure should be taken if there is a propane leak?
• What document should a licensed LP gas reseller have readily available?
• What type of maintenance is essential for prolonging the lifespan of a propane tank?
• What is the safe distance to keep flammable materials from an LP gas cylinder?
• Which of the following is a consideration when installing vent pipes on LP Gas wall heaters?
• What is the legal minimum distance from the point of transfer of LP Gas to the centerline of the nearest mainline railroad track?
• What should you not do if you smell gas?
• What is the recommended distance the regulator’s discharge must be from an opening in a building?
• For safety, where must refueling of LP Gas forklifts be conducted?
• In what scenario would the name of the LP Gas dealer be crucially important?
• At what temperature does propane become a liquid?
• Before installing appliances in mobile homes and recreational vehicles, what kind of approval is necessary?
• Which safety practice is crucial when handling LP gas?
• What is the minimum height required for the industrial type fence enclosing bulk storage plants?
• Each individual plant with LP Gas storage containers shall have a fire extinguisher of what type?
• How is propane commonly transported to customers?
• What is the term for the device that regulates the pressure of gas from the tank to the appliance?
• What is the role of a vapor recovery system during LP gas handling?
• What is the minimum storage distance of propane tanks from any structure?
• What should be inspected regularly to ensure safe operation of an LP gas system?
• What is the fire extinguisher rating required for LP Gas storage facilities?
• What is the primary function of a pressure relief valve in an LP gas system?
• To which agency must all installations of LP Gas on roofs of buildings be reported?
• Why is it important to secure LP gas tanks properly?
• What is the maximum allowable capacity for residential LP gas tanks in South Carolina?
• What color is the propane gas commonly used for safety identification?
• What is the main regulatory body overseeing LP gas in South Carolina?
• At what interval should the pressure relief valve on industrial trucks, including fork lift containers, be replaced?
• What is required for an LP gas appliance to pass inspection?
• What is "odorant" in the context of LP gas?
• What are the signs of an LP gas leak?
• What is a crucial design aspect of LP gas dispensers?
• How often should LP gas cylinders be inspected for safety and compliance?
• When storing LP-Gas and compressed gases in the same area, what must be marked according to NFPA #58?
• What color-coded markings should be used for LP gas piping?
• What is the purpose of using a pressure relief valve in LP gas systems?
• What is the procedure for siphoning LP gas from a cylinder?
• What is the maximum individual water capacity allowed for general use containers?
• What should be present on every LP gas truck that supplies propane?
• What is the maximum allowable distance for underground propane lines from buildings?
• Where must industrial trucks with permanently mounted fuel tanks be refueled?
• Why is an LP Gas dealer required to have his name permanently affixed to his tank at a consumer location?
• What is the minimum distance the vent pipe of an LP Gas space heater should extend above the roof crest when installed within ten feet or less from the roof ridge?
• What type of odor is commonly associated with propane gas for safety?
• What is the typical lifespan of a propane tank with proper care?
• What material is commonly used for LP Gas containers to maximize safety and durability?
• What is the purpose of a gas leak detector?
• According to NFPA pamphlet 58, why should all above ground LP Gas containers be kept properly painted with bright reflective paint?
• What gas is primarily utilized as a heating fuel in residential areas?
• What does the "LP" in LP gas stand for?
• What is the maximum recommended distance a propane tank should be placed away from a building?
• What does “ASME” stand for relating to propane tank specifications?
• What is the recommended action if the temperature of the LP gas tank drops significantly?
• Which agency's guidelines dictate the markings required when storing LP-Gas and other gases together?
• How does ensuring the vent pipe's height above the ridge crest enhance safety in LP Gas systems?
• According to regulations, DOT containers must be designed and tested by which organization?
• What should you do to maintain safety when using multiple LP Gas containers in a public space?
• What is an appropriate action to take if you suspect a propane leak?
• According to South Carolina's regulations, what is required to legally sell propane to the public?
• What is the primary danger of LP gas in an enclosed space?
• What is the primary function of a pressure relief valve in propane storage?
• What is the main hazard when using improper testing methods on an LP Gas piping system?
• What indicates that an LP gas truck is designed for propane delivery?
• What is the maximum drill size opening allowed for the bypass in excess flow valves?
• Which federal agency is responsible for regulating the transportation of LP gas?
• Which component is essential for ensuring safety during liquid transfer in LP Gas utilization?
• What is a common sign of improper ventilation in LP gas systems?
• What is the legal minimum distance required between the point of transfer of LP Gas and a building with fire-resistant walls?
• Propane gas is generally recognized by what type of smell?
• What is the primary purpose of the liquid transfer pump in an LP Gas system?
• How should LP gas cylinders be stored?
• What is the importance of using a two-stage regulator for LP gas?
• What is the maximum water capacity of an LP Gas fuel container that can be used on an individual forklift?
• What does the term "propane vapor" refer to?
• How should propane tanks be stored during extreme weather conditions?
• The maximum discharge pressure of a liquid pump under normal operating conditions shall be limited to what pressure?
• What is a key indicator of a propane tank's current content level?
• What is the primary function of the relief valve on a DOT container?
• In the event of a fire at a bulk storage plant, what is a recommended action to extinguish the fire?
• Which of the following is an essential safety precaution when handling LP gas?
• Which of the following is a sign of a possible LP gas leak?
• When should a regulator be checked for proper functioning?
• For LP Gas heaters used during construction, what is the safety check needed regarding the placement of heaters?
• A cylinder marked with 4E-240 indicates what construction method and material?
• Which type of storage location is unsuitable for containers holding LP Gas fed to passenger vehicles?
• The filling connections and vent from liquid gauges on DOT or ASME containers filled at permanent installation shall not be less than what distance from a source of ignition?
• What safety feature must be considered when installing LP Gas containers at consumer locations?
• Which organization provides guidelines stating that LP Gas containers must be painted with reflective paint?
• What feature is critical for an LP gas storage area?
• What must outdoor propane tanks be equipped with to ensure safety?
• What is the minimum bursting pressure required for hose used for LP Gas liquid transfer?
• DOT specification containers shall be located and installed so that the discharge from the container pressure relief device is at least what distance below building openings?
• What is the primary responsibility of an LP gas reseller?
• What is a common use of LP gas in residential settings?
• What purpose does the safety pilot on an LP Gas appliance serve?
• In residential applications, what is typically the main use of LP gas?
• Which of the following is NOT allowed within a certain distance from an LP Gas container?
• What is the required ratio of Ethyl Mercaptan in LP Gas as measured per 10,000 gallons?
• Hoses used on the low pressure side of a regulator should not exceed what length when connecting to appliances?
• LP gas bulk storage tanks of 4,000 gallons or more must be supported by piers according to what guideline?
• What is a necessary requirement for servicing a vehicle powered by LP Gas inside a building?
• If LP Gas heaters, other than integral heater-container units, are used in buildings under construction for temporary heating, what is the minimum distance the heaters should be located from the container?
• What is the maximum LP Gas water capacity for a container that can be connected to any single manifold at a permanent installation on a roof using portable containers?
• Which of the following is not a safety mechanism typically found in LP gas dispensers?
• Why is it crucial to properly train employees handling LP gas?
• What must be done before performing maintenance on LP gas equipment?
• How much time must pass from the date of manufacture for the periodic replacement of pressure relief valves in industrial trucks?
• What is the legal minimum distance between the point of transfer of LP Gas and an outdoor public assembly area?
• How is LP gas normally supplied to customers?
• Hose conveying propane liquid and/or vapor at pressures greater than 5 PSIG should be designed for what minimum bursting pressure?
• What should be done immediately if there is a gas leak detected?
• Which of the following is an acceptable method for testing LP Gas piping systems for leaks?
• What should be done if an LP gas leak is detected?